How to Cut PVC | Step-by-Step Guide & Things to Consider

You aren’t a repairman, right? So, why should you learn how to cut PVC? Some people ask this question. However, it’s a handy skill that might prove useful one day. Read on to learn all you need to know.

Disclaimer: The information included in this post is for informational purposes only and should not be taken as legal, financial, or DIY advice. We highly suggest consulting a professional before attempting any DIY home improvements or repairs. Jump to:How to Cut PVC in 6 StepsThings to ConsiderHow to Cut PVC in 6 Easy Steps

Having the ability and knowledge to cut PVC is a useful skill. Many repairs require that you properly fit PVC, and learning how to take care of this step on your own can save you big bucks down the road.

By learning how to lubricate your PVC, investing in the proper safety gear and tools, and learning how to use and store those tools, you’ll be well on your way to cutting your own pipes.

You can cut it with a hand saw, a Miter saw, or a PVC cutter. However, if you don’t know how to cut PVC correctly, you’ll find it frustrating.

Cutting PVC is pretty easy, easier than cutting other building materials. It can be cut in different ways and shapes, depending on the tools you have access to. Here’s a step-by-step guide on how to cut PVC. Preparation is key to cutting a PVC pipe the right way, so follow this as closely as possible. Step 1. Lubrication

The first step to cutting a PVC pipe is lubrication. It makes the process quicker and more comfortable. When you cut a PVC pipe, you’ll experience a lot of friction in the process. Friction is normal, but to you, it’s frustrating. A lubricant will help to reduce friction and improve the blade’s efficiency.

Another purpose the lubricant serves is reducing the pollution caused by the pipe’s particles. However, if you use too much oil, the process will be messy, and the purpose is defeated.

You also need some sort of pivot to hold the pipe in place. Even an experienced hand still needs a pivot to hold down the pipe. As you cut, you want to be careful not to cut yourself or injure another person. You have to be vigilant while cutting your PVC. Step 2. Wear Safety Gear

You should always wear safety goggles and gloves while cutting the pipe. After all, it’s dangerous. When you cut, there’s a probability that shards of the pipe will fly around, and some of them can enter your eyes. 

Try to wear a face mask to protect your lungs and nose from the pipe’s particles. Though the particles aren’t typically considered hazardous to your health if inhaled and are non-toxic, they still can cause coughing and discomfort. 

The goggles will protect your eyes from anything entering, obstructing, and limiting your vision while using dangerous objects, while the gloves will protect your hands from cuts or scrapes. Remember, your health is far more important than the pipe. Step 3. Sharpen Your Blade

Never use a dull blade to cut your pipe. A sharp blade will cut straight and true without causing trouble. A dull blade will give you problems, and in some cases, hurt you. 

You should also make sure that the blade isn’t loose before you cut. A loose blade will not cut the pipe straight. Instead, it will cut it badly and can cut you if you aren’t careful.

While you can use nearly any type of saw to cut your own PVC pipe, many people prefer to use a hacksaw. Hacksaws offer more control and flexibility over your cuts, making the process more precise and easier to manage.

The downside of using a hacksaw is that it can easily drift if you don’t control it properly, leading to uneven cuts, or even worse, injuries. It will also leave your PVC pipe with burred edges, which may not look as clean-cut as if you were to use a miter saw.

This tends to not be too much of a problem, considering PVC pipe is often hidden under cabinets or behind walls. You can also easily knock off the excess PVC, or burred edges, with a butter knife. Step 4. Point the Blade Away While Cutting

Let the blade point away from you. If any mistake occurs, the saw should fly away from you and not towards you. Always make sure to be mindful of where your hand is during the cutting process. You don’t want your hand so close to the blade that one slip could cause a major accident, but you also want it close enough to maintain control.

Always be aware of your hand placement. And always, always take your hands away from places that are close to the blade. You should never use your hand as a vice or holding pivot while cutting the PVC pipe. Step 5. Read the Instructions Manual Carefully

Always read the instructions manual for every piece of equipment you want to use. This is the number one safety rule of machines. An instruction manual contains the working processes of the equipment.

It also shows what you should do and what not to do. Reading this manual and following it’s the first step to securing your safety. Note that the instructions for different methods will vary.

Some tiny differences might be what determines whether you get an exquisite finish or end up with a messy job. Below are a few specifics:When cutting with the rotating pipe cutter, place the point you want to cut on the blade. The blade is located in the jaws of the cutter. After setting it well, you should squeeze the cutter’s handles together and rotate it around the pipe. For the ratcheting pipe cutter, with the blade on the marked spot, squeeze until you reach the pipe wall. Release the pipe cutter, re-squeeze, and repeat the procedure until the cutter is through the pipe. To use a hand saw, you have to hold it over a pivot to keep it in place. Mark the spot you want to cut, hold your hand over the pivot and the pipe, and begin to saw through the pipe. When using a Miter saw, clamp the PVC pipe to the saw base, and set the blade to the spot you want to cut. Make sure your hand is straight and accurate. Drop the blade on the spot and saw slowly through the pipe, then put off the saw button to stop the blade before lifting it back up. Step 6. Store Your Equipment Properly

Make sure to keep your equipment in a safe place after its use. If you don’t do this, an unsuspecting person might get hurt. Sometimes, it could be you. Things to Consider

Surachet Jo/Shutterstock

Before cutting your own PVC, there are several things you’ll want to consider to keep you and your PVC in top shape:Things to DoLubricate your PVC before cuttingSharpen your bladeKeep hands away from bladeWear safety goggles, gloves, and masksThings Not to DoPoint blade towards you when cutting Skip reading the user’s manual of your equipmentUse a loose bladeImproperly store your equipment after useSo, How Do You Cut PVC?

Anyone can learn how to cut PVC; all it requires is a bit of dedicated practice. Remember, safety is your utmost priority, and you have to be careful when dealing with the tools, especially a Miter saw. Follow the steps closely, and you’ll be a pro in no time! You Might Also Like:How to Cut Cement BoardHow to Remove Drywall AnchorsWhat Is Pex Pipe?

Location:

Share :